Concentrator for refining gold from panning, black - 116.61 € for piece

GS GOLD&GEMS12V CONCENTRATOR

The version with a diameter of 20 cm perfectly solves the problem of cleaning the heavy fraction from panning gold and precious stones.

In a few moments, heavy impurities are sucked in by the vortex that forms in the concentrator.

By regulating the speed using the valve, you can precisely regulate the concentration process and the working speed.

Set includes:

• Concentrator
• flexible weighing cell with precision valve
• 2V pump 500/1100 gph

This complete set only requires a power source and a bucket of water.

The intuitive work system allows you to handle the operation in a few moments. You turn on the concentrator, pour schlich into it and you can go make coffee. The device cleans the gold for you.

The proposed work configuration is closed-loop work.

Place the concentrator on a sieve of at least 10 mm and the sieve on a 20-25 L bucket filled 2/3 with clean water.

The bucket submersible pump allows working in a closed water flow system and this application can be used in all conditions.

The power cables about 100 cm long in such a system reach the battery, which can stand next to it, which guarantees a clean and quick readiness for work even in the field ;) Accidental losses end up in a bucket and we can clean the same material again.

The material is fed only during stable operation, in small portions and at intervals of approximately 10 seconds. The ideal one-time amount (portion) of administration during work is about 100 ml of concentrate (1 large tablespoon)

The material should be fed gently and as much as possible along the inner wall of the device, which will prevent accidental suction of fine gold into the vortex.

For very fine gold, clean it twice.

It is also possible to concentrate precious stones from sludge, but this requires the addition of screened, divided and settled stones (grains of similar size), which facilitates the process of separation from light minerals.

Only heavy minerals remain in the concentrator, the stone concentration process requires more time and slightly faster water and previously prepared material, divided into fractions.

“The maximum known and tested efficiency in the concentration of precious stones is grains up to 5 mm. Larger fractions have not been studied.”

The product is made by FDM (Fused Deposition Modeling) technology.